Legacy: Thrasher V1 and V2 Parts and Options

Find Parts and Options for your Legacy Thrasher V1 and V2 Here.
Quick view
Tail Bushings - 2 Pack
$19.99
Quick view
Drive Shaft Seal - 2 pack
$19.99
Quick view
Thrasher V1 and V2 Wear Ring
$19.99
Quick view
Thrasher V1 and V2 Steering Servo Motor
$39.00
Quick view
Billet Aluminum Alloy Impeller V1 and V2
$79.00
Quick view
Sponson Fins - Set of 4
$29.99
Quick view
Lid Pin
$19.99
Quick view
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
$59.99
Quick view
Bilge Check Valve
$9.99
Quick view
Thrasher V1 and V2 lid with captive screw and lid pin
$39.99
Quick view
Addition hull vent kit
$19.99
Quick view
Thrasher Lid Captive Screw
$19.99
Tail Bushings - 2 Pack

Tail Bushings - 2 Pack

$19.99
2 pack - Stock tail bushing for all Thrasher versions
Drive Shaft Seal - 2 pack

Drive Shaft Seal - 2 pack

$19.99
This drive shaft seal is located between the pump body and the motor mount to significantly reduce the flow of water into the hull.  One seal is used per boat.  Includes two seals.
Thrasher V1 and V2 Wear Ring

Thrasher V1 and V2 Wear Ring

$19.99
Stock wear ring for Thrasher V1 and V2
Thrasher V1 and V2 Steering Servo Motor

Thrasher V1 and V2 Steering Servo Motor

$39.00
Stock servo motor for Thrasher V1 and V2.  Includes horn and stainless steel mounting screws.
Billet Aluminum Alloy Impeller V1 and V2
Billet Aluminum Alloy Impeller V1 and V2
Billet Aluminum Alloy Impeller V1 and V2
Billet Aluminum Alloy Impeller V1 and V2

Billet Aluminum Alloy Impeller V1 and V2

$79.00

CNC Machined 6061-T6 Aluminum Alloy Impeller. These high performing impellers are designed to maximize pump performance. Made in the USA, machined to the highest quality standards and finished with an anodized surface to increase resistance to corrosion and wear.

 

Sponson Fins - Set of 4

Sponson Fins - Set of 4

$29.99
This is a complete set of 4 sponson fins (2 port and 2 starboard) for Thrasher Jet Boats.  If you are adding sponson fins to a Thrasher that does not already have a sponson fin kit installed, you will need to purchase a sponson fin kit, which includes these fins as well as mounting hardware.
Lid Pin

Lid Pin

$19.99
Stock lid pin for all versions of Thrasher RC Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats
Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats

Graphics KitS for V1, V2, V3, and Thrasher 27" Jet Boats

$59.99

Graphics Kit

Our graphics kits are made from the highest quality printed vinyl.  With air release technology and installation friendly adhesive, these are the easiest decals you will ever install.  These kits will install on V1, V2, V3, and Thrasher 27" Jet Boats.

 


Bilge Check Valve

Bilge Check Valve

$9.99
Check valve for all Thrasher vacuum bilge systems
Thrasher V1 and V2 lid with captive screw and lid pin

Thrasher V1 and V2 lid with captive screw and lid pin

$39.99
Thrasher V1 and V2  lid with captive screw and pin.  White only, graphics sold separately.
Addition hull vent kit
Addition hull vent kit
Addition hull vent kit
Addition hull vent kit

Addition hull vent kit

$19.99

This upgrade adds an additional vent to your hull allowing it to self right faster and more reliably.  The kit is quick to install but will require you to drill a hole and insert a port using a soldering iron.  A 5mm drill and a soldering iron is required.

 

Thrasher Lid Captive Screw

Thrasher Lid Captive Screw

$19.99
Captive screw for Thrasher lids - Fits all Thrasher Lids.